Ir para conteúdo
  • Cadastre-se

dev botao

Preciso imprimir um QrCode que gero no c# na impressora codigo de barras, sempre fala que só aceita monocromatica, como transformar em monocromatica a imagem


Ver Solução Respondido por Rafael Dias,
  • Este tópico foi criado há 1076 dias atrás.
  • Talvez seja melhor você criar um NOVO TÓPICO do que postar uma resposta aqui.

Recommended Posts

encontrei essa forma na net ->  

public static Bitmap ConvertTo1Bit(Bitmap input)
        {
            var masks = new byte[] { 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 };
            var output = new Bitmap(input.Width, input.Height, PixelFormat.Format1bppIndexed);
            var data = new sbyte[input.Width, input.Height];
            var inputData = input.LockBits(new Rectangle(0, 0, input.Width, input.Height), ImageLockMode.ReadOnly, PixelFormat.Format24bppRgb);
            try
            {
                var scanLine = inputData.Scan0;
                var line = new byte[inputData.Stride];
                for (var y = 0; y < inputData.Height; y++, scanLine += inputData.Stride)
                {
                    Marshal.Copy(scanLine, line, 0, line.Length);
                    for (var x = 0; x < input.Width; x++)
                    {
                        data[x, y] = (sbyte)(64 * (GetGreyLevel(line[x * 3 + 2], line[x * 3 + 1], line[x * 3 + 0]) - 0.5));
                    }
                }
            }
            finally
            {
                input.UnlockBits(inputData);
            }
            var outputData = output.LockBits(new Rectangle(0, 0, output.Width, output.Height), ImageLockMode.WriteOnly, PixelFormat.Format1bppIndexed);
            try
            {
                var scanLine = outputData.Scan0;
                for (var y = 0; y < outputData.Height; y++, scanLine += outputData.Stride)
                {
                    var line = new byte[outputData.Stride];
                    for (var x = 0; x < input.Width; x++)
                    {
                        var j = data[x, y] > 0;
                        if (j) line[x / 8] |= masks[x % 8];
                        var error = (sbyte)(data[x, y] - (j ? 32 : -32));
                        if (x < input.Width - 1) data[x + 1, y] += (sbyte)(7 * error / 16);
                        if (y < input.Height - 1)
                        {
                            if (x > 0) data[x - 1, y + 1] += (sbyte)(3 * error / 16);
                            data[x, y + 1] += (sbyte)(5 * error / 16);
                            if (x < input.Width - 1) data[x + 1, y + 1] += (sbyte)(1 * error / 16);
                        }
                    }
                    Marshal.Copy(line, 0, scanLine, outputData.Stride);
                }
            }
            finally
            {
                output.UnlockBits(outputData);
            }
            return output;
        }

        public static double GetGreyLevel(byte r, byte g, byte b)
        {
            return (r * 0.299 + g * 0.587 + b * 0.114) / 255;
        }

 

//aqui chamo o método 

A.Save("c:/teste/myBitmap2.bmp");

ConvertTo1Bit(A); // com o caminha da imagem

 

como pegar o retorno em bmp 1bit ??????

Link para o comentário
Compartilhar em outros sites

20 horas atrás, Rafael Dias disse:

Procure como converter Bitmap para monocromático em c# você vai achar vários topicos.

encontrei essa forma na net ->  

public static Bitmap ConvertTo1Bit(Bitmap input)
        {
            var masks = new byte[] { 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 };
            var output = new Bitmap(input.Width, input.Height, PixelFormat.Format1bppIndexed);
            var data = new sbyte[input.Width, input.Height];
            var inputData = input.LockBits(new Rectangle(0, 0, input.Width, input.Height), ImageLockMode.ReadOnly, PixelFormat.Format24bppRgb);
            try
            {
                var scanLine = inputData.Scan0;
                var line = new byte[inputData.Stride];
                for (var y = 0; y < inputData.Height; y++, scanLine += inputData.Stride)
                {
                    Marshal.Copy(scanLine, line, 0, line.Length);
                    for (var x = 0; x < input.Width; x++)
                    {
                        data[x, y] = (sbyte)(64 * (GetGreyLevel(line[x * 3 + 2], line[x * 3 + 1], line[x * 3 + 0]) - 0.5));
                    }
                }
            }
            finally
            {
                input.UnlockBits(inputData);
            }
            var outputData = output.LockBits(new Rectangle(0, 0, output.Width, output.Height), ImageLockMode.WriteOnly, PixelFormat.Format1bppIndexed);
            try
            {
                var scanLine = outputData.Scan0;
                for (var y = 0; y < outputData.Height; y++, scanLine += outputData.Stride)
                {
                    var line = new byte[outputData.Stride];
                    for (var x = 0; x < input.Width; x++)
                    {
                        var j = data[x, y] > 0;
                        if (j) line[x / 8] |= masks[x % 8];
                        var error = (sbyte)(data[x, y] - (j ? 32 : -32));
                        if (x < input.Width - 1) data[x + 1, y] += (sbyte)(7 * error / 16);
                        if (y < input.Height - 1)
                        {
                            if (x > 0) data[x - 1, y + 1] += (sbyte)(3 * error / 16);
                            data[x, y + 1] += (sbyte)(5 * error / 16);
                            if (x < input.Width - 1) data[x + 1, y + 1] += (sbyte)(1 * error / 16);
                        }
                    }
                    Marshal.Copy(line, 0, scanLine, outputData.Stride);
                }
            }
            finally
            {
                output.UnlockBits(outputData);
            }
            return output;
        }

        public static double GetGreyLevel(byte r, byte g, byte b)
        {
            return (r * 0.299 + g * 0.587 + b * 0.114) / 255;
        }

 

//aqui chamo o método 

A.Save("c:/teste/myBitmap2.bmp");

ConvertTo1Bit(A); // com o caminha da imagem

 

como pegar o retorno em bmp 1bit ??????

Link para o comentário
Compartilhar em outros sites

  • Este tópico foi criado há 1076 dias atrás.
  • Talvez seja melhor você criar um NOVO TÓPICO do que postar uma resposta aqui.
Visitante
Este tópico está agora fechado para novas respostas
×
×
  • Criar Novo...

Informação Importante

Colocamos cookies em seu dispositivo para ajudar a tornar este site melhor. Você pode ajustar suas configurações de cookies, caso contrário, assumiremos que você está bem para continuar.